cookies
Tu vas aimer nos « cookies »
Les cookies du site Muziker sont utilisés pour que ta visite chez nous soit toujours une expérience agréable. Accepte l'utilisation de tous les cookies en cliquant sur le bouton « Je suis d'accord », ou sélectionne uniquement ceux qui sont à ton goût dans les paramètres. Plus d’infos.
Je suis d'accord
Refuser

Palmer PWT 05 MK 2 Adaptateur d'alimentation

5
Alimentation Pedalboard 5 sorties. Stable 250 mA 9V sur chacune des cinq sorties négatives centrales. Pour fournir une alimentation CC propre à vos pédales et éliminer les boucles de masse entre elles et le ronflement associé, les sorties sont...
Extra gifts
Tu reçois un cadeau avec ton achat
En stock 3 pièces
Expédié aujourd'hui ,
2024-04-23
Adaptateur d'alimentation Palmer PWT 05 MK 2 Adaptateur d'alimentation

Palmer PWT 05 MK 2 Adaptateur d'alimentation

118 €

Code produit: PWT05MKII | ID: 242370

Palmer PWT 05 MK 2 Adaptateur d'alimentation

Ceci est une traduction générée par logiciel:

Alimentation Pedalboard 5 sorties. Stable 250 mA 9V sur chacune des cinq sorties négatives centrales. Pour fournir une alimentation CC propre à vos pédales et éliminer les boucles de masse entre elles et le ronflement associé, les sorties sont isolées. Commandes: interrupteur principal (marche / arrêt), sélecteur de tension. Boîtier en acier robuste. Alimenté par une alimentation 9 V CC. Dimensions: 140 x 10 5x 45 mm. Poids: 1,5 kg

Paramètres et spécifications

Caractéristiques

Nombre de sorties

5


Entrées et sorties

Polarité


Alimentation

Tension

9V

Courant

Type de chargeur

Tip utikača

Source de courant

240V


Accessoires

Bloc d'alimentation inclus

Pas


De campagne

Fabriquée au

Allemagne


Note globale basée sur 6 avis d'utilisateurs:

5

Josip S.

Impression générale

Date
02.08.2023

Best investment I ever made for guitar effects! No buzz at all! With this you find out which one of your pedals is bad. I literally threw away an old Tubescreamer because I identified it as the cause of problems with the signal. Afterwards, I tested all other effects with the old power supply and the this one and everything is better with this one!

Ján G.

Impression générale

Date
03.10.2022

Produkt splnil očakávania. Kvalitná konštrukcia a prevedenie.

Michal Z.

Impression générale

Date
06.02.2022

Šum v podstatě neexistuje, možnost spojení výstupů pro dvojnásobný proud/napětí jsem zatím nevyužil. Můj celkový odběr je do 100 mA, takže se ani nezahřeje.

Heureka.cz

Impression générale

Date
11.12.2020

Vyšší váha (cca a 1 kg) proti konkurenčním produktům (cca 0,3 kg) mi nevadí, podstatné plus pro mě bylo, že uvnitř je toroidní transformátor. Nechtěl jsem moderní zařízení na principu "spínaného zdroje". Pokud by existovalo podobné zařízení od stejného výrobce s více výstupy než 5, asi bych volil ještě větší počet výstupů.

Plusy: funguje, jak má, zatím splnil moje očekávání, tj. především při zapojení efektových krabiček je absolutní ticho, nic nebrumí, nešumí, což dříve při napájení kombinací jednoúčelových levných napaječů 220 V AC/9 V DC a baterií byl problém.

Mínusy: pro někoho možná vyšší váha

Ionescu C.

Impression générale

Date
05.11.2020

It is a big unit and I doubt it can be placed under the pedalboard because of its height (45 mm). It is a bit wider than a normal pedal, comparable with Behringer's Vintage Phaser and I placed on the board. Inside is a big toroidal transformer and all 5 outputs are independent and stabilized. It has two LEDs one for power and one for overload. It comes with 10 cables for powering pedals (length without jacks - 60 cm), one daisy with 6 jacks, one cable for doubling the voltage and one cable for doubling the current. So you can power even a 18V pedal, or another hungry device which requires 500mA. With daisy cable you are no longer limited only of 5 pedals, you can power at least two more pedals. The power unit is dead silent. None of my 5 pedals exhibits hiss, buzz or other kind of noises. Really, worth it any penny.